Operating Instructions - Skil LL932301 Manual Del Propietário

OPERATING INSTRUCTIONS

WARNING
never immerse your tool or charger in fluid or allow a fluid to
flow inside them. Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach or bleach containing
products, etc., can cause a short circuit.
Applications
Your compact self-leveling cross line laser can be hand-held for
point marking and simple alignment by sight, or it can be used
to make a "chalk line" by using the lock mode. It is ideal for the
following applications:
Hanging pictures, photos, or artwork on walls
•
Wallpapering and stencil work
•
Framing doors and windows
•
Installing electrical wiring and pipes
•
Mounting wall fixtures, electrical outlets, switches and lighting
•
Installing a drop ceiling
•
Painting
•
Installing closets
•
Laying tile and flooring
•
Charge the Tool
NOTE: The tool is shipped partially charged; charge the battery
before first use.
Recharge the tool for approximately 3 hours after the battery is
exhausted. It is not recommended to recharge the tool for more than
24 hours each time.
a. Insert the USB interface of the USB charging cable into the USB
port of the power supply (not included).
12
To reduce the risk of fire, personal injury,
and product damage due to a short circuit,