Foam Pad Removal And Installation; Flip The Back Shell; Lumbar Support Pad - Permobil ROHO AGILITY Active Aluminum Back Serie Manual Del Usuario

Foam Pad Removal and Installation

Warning: Inspect the cover components for damage and replace if necessary.
Removal:
1. Detach the cover and foam from the
back shell.
2. Unzip and remove the cover.

Flip the Back Shell

1. Remove the product if it is already installed on the
wheelchair. See "Product Removal".
2. Rotate the back shell.
3. Follow all instructions to adjust and install the product.

Lumbar Support Pad

Warning: DO NOT install accessories on the product while the individual is in the wheelchair.
The Lumbar Support Pad provides added support to the lumbar region. Package contents include hook and loop fastener strips. The hook side of the fastener strip
is pre-attached to the back of the Lumbar Support Pad.
To Install a Lumbar Support Pad:
1. Detach the cover flap closest to the zipper and unzip the cover.
2. Place the Lumbar Support Pad inside the cover, positioned at the curve of the lumbar spine, or where it is most comfortable. The Lumbar Support Pad may be
placed either in front of or in back of the foam pad.
3. Remove the backing from the loop side of the fastener strip and secure the Lumbar Support Pad in the desired position.
Note: If the loop fastener strip is attached to the inside of the cover, the fastener strip may need to be replaced after multiple cover washings.
4. Zip the cover closed and re-attach the cover flap.
To Remove a Lumbar Support Pad:
1. Detach the cover flap closest to the zipper and unzip the cover.
2. Carefully detach the hook and loop fastener strips from each other.
ROHO AGILITY Active Aluminum Back Series Operation Manual
13
Installation:
1. Unzip the cover.
2. Place the foam pad into the cover.
The wide and narrow ends of the foam
pad should be aligned with the wide and
narrow ends of the cover.