Operation Instruction - H2O TEK RD-126L/D-106 Manual Del Usuario

OPERATION INSTRUCTIONS
Control Panel
INDICATORS
Tank Full Indicator
The tank full indicator will light up in red when the water tank is full,the machine will stop
working. If light is on, empty the water out of the water tank and make sure the tank is returned
to its position properly.
Power On/Off Button
The green Power indicator will light up when the unit is plugged in, regardless of whether the
machine is in operation or not.
Timer Button
When you set the timer, it will light up in green when timing started or shut off.
Auto Dehumidifying Indicator
The default humidity is 50%，the indicator will show green.
Fan Speed Indicator
The right fan speed indicator will light up in green when the machine is set to run in low fan
speed.
The left fan speed indicator will light up in red when the machine is set to run in high fan speed.
Continuous Dehumidifying Indicator
The machine will be dehumidifying Continuously on this mode the default Fan Speed is High and
an be adjusted manually，the Humidity cann't be adjusted.
Humidity Level and Timer Indicator
When the unit is plugged in, it will indicate the room humidity level
When you set the humidity, it will indicate the humidity that you have selected
When you program the time for the unit to turn on or off, it will show the hours
When you press the humidity set button for 2seconds, it would display the present humidity.
16