H2O TEK RD-126L/D-106 Manual Del Usuario página 17

Basic Operation
Note:
Before you start the unit, make sure that the air outlet grille is open. Otherwise, the unit
may be overheated.
1. Start the unit
When the unit is plugged in, a buzzer will beep and the unit will be set to run at low fan
speed by default. Press
2. Set Fan Speed
Press button to set the desired fan speed between high and low.
3. Set the Humidity Level
Press button to set the desired humidity level in the room.
Add button
Press this button to add the humidity and time; the humidity setting-up procedure is 50%-
55%-60%-65%-70%-75%-80%-85%-90%-95%.
Minus button
Press this button to reduce the humidity and time; the humidity setting-up procedure is
50%-45%-40%-35%-30%-25%-20%.
4. Stop Operation
Press button again to stop the operation
Note:
Never stop the unit by unplugging the power cord.
When the ambient temperature is between 5c and 12c, the unit will pause every 30 min
to defrost automatically.
When the ambient temperature is between 12c and 20c, the unit will pause every 45min
to defrost automatically.
When the ambient temperature is between 20c, and 35c, auto -defrost will not be activat-
ed.
button to start operation, the default humidity is 50%.
17