SPX EF-7701 Manual Del Usuario página 12

PREPARATIONS
ASSEMBLY AND INSTALLATION
1. Select a suitable location for assembly of the receiver.
2. Connect the plug onto the start relay on the engine.
3. Connect the ground cable of the receiver to the negative
terminal of the electrical motor of the hydraulic pack.
4. Place a fuse between the receiver and the battery to
prevent damage from short circuits to the receiver.
PLACEMENT OF THE RECEIVER
• Select a location, if possible, that is protected from the
wind and weather. Place it with cable-glands facing
downward.
Avoid locations where the receiver may be exposed to
!
abnormal moisture conditions, e.g. during high pressure
washing.
Avoid locations close to metal objects, electrical cables
!
and antennas. Provide the receiver with a separate power
supply.
4