Assembly And Installation - SPX EF-7701 Manual Del Usuario

MANUAL ENGLISH
PREPARATIONS

ASSEMBLY AND INSTALLATION

1. Select a suitable location for assembly of the receiver.
2. Connect the Positive (+). (BLACK 2)
3. Connect the ground cable of the receiver (YELL/GR)
4. Connect the first coil (BLACK 3)
4. The black cable (4) is to connect a second coil when using a
3P/4W valve. If not used please protect or cut off.
5. Place a fuse between the receiver and the battery to prevent
damage from short circuits to the receiver.
Rev 1 date 26-04-11 RS 4-8