SPX EF-7701 Manual Del Usuario página 5

MANUAL ENGLISH
PLACEMENT OF THE RECEIVER
- Select a location, if possible, that is protected from the wind
and weather. Place it with cable-glands facing downward.

Avoid locations where the receiver may be exposed to
abnormal moisture conditions, e.g. during high pressure
washing.

Avoid locations close to metal objects, electrical cables and
antennas. Provide the receiver with a separate power supply.
NOTE! Upon delivery the receiver will be pre-wired.
! The following instructions should only be used in case of
reconnecting the wiring.
Rewiring the receiver:
Connect the right wiring to the terminals
- Black 2 (+) and the yellow/green cable according to the
above drawing.
Connect the signal cabling to the terminals for the relays:
- Black 3 and 4 cables according to the above drawing
- Black 2 on the relays is pre-wired on the circuit boards.
STORING THE TRANSMITTER CODE:
How to program the id-code of the transmitter?
1. Unscrew the 4 screws to open the receiver.
Rev 1 date 26-04-11 RS 5-8