4.4 Fitting The Reduction Sealing Ring - Minebea Intec PR 6130/38S Manual De Instalación

4 Installation and connection information

4.4 Fitting the reduction sealing ring

Minebea Intec
1. Unscrew the cap nuts (2).
2. Remove the existing sealing ring from the metal sleeve (3).
3. Insert the reduction sealing ring (1) in the M20 cable gland (for cables ≤8 mm).
Note:
It is essential to irst insert the side with the sealing lip in the metal sleeve!
4. Tighten the cap nuts (2) again.
Cable Junction Box PR 6130/38S
EN-13