Connecting To The Power Supply - Stihl AL 301-4 Manual De Instrucciones

4 Safety Precautions
► Never stack more than three chargers.
► Do not stack chargers while a STIHL AR
battery is being charged.
► If the charger is transported in a vehicle: Do
not stack several chargers.
4.7

Connecting to the power supply

Contact with live components may occur for the following
reasons:
– The connecting cable or the extension cord is damaged.
– The mains plug of the connecting cable or extension cord
is damaged.
– The socket is not properly installed.
DANGER
￭ Contact with live parts may result in electric shock. This
may result in serious or fatal injury to the user.
► Make sure that the connecting cable, extension cord
and their mains plugs are undamaged.
If the connecting cable or the extension cord is
damaged:
► Do not touch the damaged area.
► Disconnect the mains plug from the power
supply.
► Make sure your hands are dry before touching the
connecting cable, extension cord or mains plugs.
► Plug the mains plug of the connecting cable or
extension cord into a properly installed, shockproof
socket with the correct fuse rating.
► Install the charger with a ground fault circuit interrupter
(30 mA, 30 ms).
0458-829-9921-A
￭ A damaged or unsuitable extension cord can result in
electric shock. This may result in serous or fatal injury to
people.
► Use an extension cord with the correct cross-section,
@ 13.2.
WARNING
￭ Overvoltage can occur in the charger if the line voltage or
frequency are incorrect during charging. The charger may
be damaged.
► Make sure that the mains voltage and the mains
frequency of the power supply match the data on the
rating plate of the charger.
► If the charger is used in a vehicle: Make sure the line
voltage and frequency in the vehicle agree with the data
on the charger's rating plate.
￭ An incorrectly routed connecting cable or extension cord
may be damaged and people may trip over it. People may
be injured and the connecting cable or extension cord may
be damaged.
► Route and mark the connecting cable and extension
cord so that people will not trip over them.
► Route the connecting cable and extension cord so that
they are not under tension or tangled.
► Route the connecting cable and extension cord so that
they will not be damaged, kinked or crushed and will not
be chafed.
► Protect the connecting cable and extension cord from
heat, oil and chemicals.
► Lay the connecting cable and extension cord on a dry
surface.
English
21