wissner-bosserhoff movita Manual De Instrucciones página 111

Temporary patient surface extension by butterfly screw
If the bed is equipped accordingly, the patient surface of the bed can be extended and short-
ened again by 10 cm, 20 cm or 32 cm at the foot end without tools. This is why the foot section
of the bed can be extended and locked in three positions. The foot section can be unlocked
with two butterfly screws located on the left and right locking mechanism of the foot section.
You need to insert a protector to close the resulting foot-end gap in this case as well.
To extend the patient surface of the movita nursing bed:
▪ Loosen and remove the butterfly screws on both sides.
The foot section is now released.
▪ Pull the foot section to the correct position and lock it in place by inserting and tightening the
butterfly screws. Align the holes to do so.
To shorten the patient surface of the movita nursing bed again, proceed in reverse order.
Variants
Item Designation
1 For type 10 siderails, without padding, without protector
2 For type 09 2-part siderails, without padding
3 For type 09 3-part siderails, without padding
4 For type 10 siderails, without padding, without protector
5 For type 09 2-part siderails, without padding
6 For type 09 3-part siderails, without padding
Art. no.
10-0595
10-0595
10-0595
10-0595
10-0595
10-0595
111