wissner-bosserhoff movita Manual De Instrucciones página 116

13.7.4 Extension for side guards (09)
approx. 6 cm safety clearance
If you want to attach an extension to the side guard (09):
▪
Raise the side guards of the nursing home bed to the highest position.
▪
Release the clamping lever by turning it by 90° and twist out the mushroom head screw.
▪
Put the side guard extension onto the side guard of the nursing home bed as pictured.
▪
Twist the mushroom head screw in and tighten the clamping lever by turning it by 90°.
▪
Perform a functional test of the side guard with the side guard extension attached.
If you want to remove an extension from the side guard (09):
▪ Perform the steps described above in reverse order.
Attention!
The side safety clearance from the head and foot ends must each be approx. 6 cm.
Rule of thumb: The clearance must be equally distributed at both ends. For nursing
home beds of special length (longer than 2 m), a side guard extension of special
length must be used.
Attention!
Please also use the available side guard cushioning (accessories) for side guards
with extensions as an important additional safety and protection feature.
116