Cleaning And Maintenance - Klarstein ZERMATT Manual De Instrucciones

1800 W: Press this button for high heat level. The appliance will beep. The heater
will provide high heat level. Press once again to stop the high heat level
function.
Temperature Control
To adjust the temperature to your individual requirements, turn the temperature control
dial to the right (clockwise) to increase the temperature and to the left (counter
clockwise) to decrease the temperature.
When desired ambient temperature is reached, the heater will automatically stop
heating. When the ambient temperature drops below the desired temperature 2 °C, the
heater will resume heating.

CLEANING AND MAINTENANCE

WARNING:
Risk of electric shock and fi re! Before attempting any cleaning and
maintenance, switch the appliance off and disconnect it completely
from the power supply. Maintenance should only be carried out by a
qualifi ed technician.
• Before cleaning any part of the appliance, turn off all controls and switches and
unplug the power cord from the wall outlet. Wait until the appliance has cooled
down completely.
Cleaning Glass Panel
• Remove dust with a clean dry cloth.
• Remove fi ngerprints and other marks from the glass panel by using a clean damp
cloth. Do not use abrasive cleaners or spray liquids on the glass surface.
• Metal and metal painted parts should be cleaned with clean damp cloth only.
Do not use abrasive cleaners or spray liquids on these surfaces.
EN
21