Proline PGH461SS-B Manual Del Usuario página 13

All manuals and user guides at all-guides.com
Do not use naked flame to check gas leakage. All metal components used
during gas connection must be clear of rust. Also check the expiry dates of
components used.
The points that must be checked during Fixed gas connection assembly
To assemble a fixed gas connection (gas connection made by threads, e.g. a nut),
there are different methods used in different areas. The most common parts are
already supplied with your appliance. Any other part can be supplied as spare part.
During connections always keep the nut on the gas manifold fixed, while rotating
the counter-part. Use spanners of appropriate size for safe connection. For all
surfaces between different components, always use the seals provided in the spare
set. The seals used during connection should also be approved to be used in gas
connections. Do not use plumbing seals for gas connections.
Remember that this appliance is prepeared to be connected to gas supply in the
country for which it has been produced. The main country of destination is marked
on the rear cover of the appliance. If you need to use it in another country, any of
the connections in the figure below can be required. In such a case, contact local
authorities to learn the correct gas connection.
Figure 6
It is required to call the authorized service to be able to make the gas connections
appropriately and in compliance with safety standards.
WARNING; Do not search for a gas leak with a naked flame source such as
a lighted candle.
9