Proline PGH461SS-B Manual Del Usuario página 8

All manuals and user guides at all-guides.com
3. Part : INSTALLATION AND PREPARATIONS FOR USE
Fastening the installation brackets
Each cooker top is provided with an
•
installation kit including brackets and
screws for fastening the top to the
worktop.
Turn the hob upside down and fasten
•
the brackets "A" which can be
connected to the hob in two different
positions depending on the worktop
thickness as shown in figures 2 to 4
to the appropriate screw holes,
without tightening the screws "B" for
the moment.
Fastening the cooker top
Spread the sealing material "C"
•
around the worktop hole, making
sure that the junctions overlap at the
corners.
Insert the hob into the hole and
•
position it correctly. (Fig 1)
Adjust the position of the brackets
•
"A" and tighten screws "B" to fix the
hob firmly in position (Fig 2-4)
Carefully trim away the excess
•
sealing material from around the hob.
Installation in kitchen cabinet with
door (Figure 5)
The distance between the bottom of the
hob and the cabinet top should be at
least 60mm. If this space cannot be
achieved, it is recommended that a
heat resistant board be installed below
the hob.
XSEC0001-XSEC0001
SECTION
XSEC0002-XSEC0002
SECTION
Figure 5
7
t > 25mm
t < 25mm