Cleaning And Maintenance; Technical Specifications - HQ-Power VDPLOP3601RGB Manual Del Usuario

9.

Cleaning and maintenance

1. All screws should be tight and free of corrosion.
2. The housing, the lenses, the mounting supports and the installation location (e.g. ceiling,
suspension, trussing) should not be deformed, modified or tampered with e.g. do not drill extra
holes in mounting supports, do not change the location of the connections ...
3. Mechanically moving parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician
maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
8. Contact your dealer for spare parts if necessary.
10.

Technical specifications

power supply
power consumption
DMX channels
DMX512 connection
beam angle
dimensions
Use this device with original accessories only. Velleman nv cannot be held responsible in
the event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman Components nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or otherwise without
the prior written consent of the copyright holder.
06/01/2009
VDPLOP3601RGB
IP rate
LEDs
weight
240VAC / 50Hz
36 x 1W RGB Edison
XLR 3-pin socket
240 x 170 x 300mm
7
40W
IP65
3 / 4 / 6
30°
4kg
© 2008 Velleman Components nv