Beretta MYNUTE X R Instrucciones De Instalacion Y Uso página 11

ENGLISH
Structure of the MENU tree of the REC10
Indicates the pressure at an OT device
Indicates the pressure at a WIFI device
Indicates the pressure of an outdoor temperature sensor
Indicates the activation of special domestic hot water functions or the presence of a system for managing the solar thermal array
Indicates the connection to a heat pump (not used on this model)
Icon that lights up when there is an alarm
It comes on when there is a fault together with the icon , except for flame and water alarms
Indicates the presence of a flame, in the event of a flame lockout the icon looks like
Reset It comes on when there are alarms that require a manual reset by the operator.
It comes on when there is an operation confirmation request
Enter
When the icon is active, it indicates that the "confirm" function of button A is active
When the icon is active, it indicates that the "back/cancel" function of button B is active
When the icon is active, it is possible to navigate the menu or raise the value of the selected parameter
When the icon is active, it is possible to navigate the menu or lower the value of the selected parameter
The icon comes on if central heating is active, it blinks if a heating request is in progress
The icon comes on if domestic hot water is active, it blinks if a domestic hot water request is in progress
They indicate the set point level set (1 notch minimum value, 4 notches maximum value)
Indicates the days of the week
1 2 3 4 5 6 7
When the "central heating programming timing" function is enabled this icon indicates that the system heating (main zone) is in AUTOMATIC mode
(the management of the heating requests follows what has been set with the timer). If we are outside the time band for enabling the heating AUTO
AUTO ON
OFF is displayed
When the "central heating programming timing" function is enabled this icon indicates that the system heating (main zone) is in MANUAL mode (the
MAN ON
management of the heating requests does not follow what has been set with the programming timing, but it is always active)
MAN OFF This icon indicates when the "central heating programming timing" is not enabled
11