Charge Status Indicator - Fullwat CMF-7C Serie Manual Del Usuario

Charge status indicator

The CHARGING and FULLY CHARGED LEDs will illuminate and flash in various patterns to indicate the different
stages of charging. See below for flash patterns.
Power off
Power on
1. Desulphation
2. Soft start
3. Bulk charging
Charging 4. Absorption charging
5. Battery Test
6. Recondition
7. Float charging
Fully charged
Non Battery Link protection
Output polarity reverse protection
Output short protection
Over voltage protection
Faulty battery
Protección contra exceso de temperatura
Note Solid
:
Power on led: Red LED illuminates (solid) when power on.
Charging leds: Yellow LEDs illuminates and flashes during 7-stage charging process indicating different
charging stages.
Fully charged led: Green LED illuminates (solid) when fully charged.
Fault led: When Red LED illuminates and flashes, it may be caused by:
1. Reverse connection between positive and negative of the DC lead.
2. Battery charger output short.
3. Non battery link.
4. 12V charger connects to a battery voltage higher than 17.5V or 24V charger connects to a battery
voltage higher than 35V.
5. Charger's internal temperature is higher than 70ºC
6. When FAULT LED (red) flashes and CHARGING LED (yellow) in bulk charging stage illuminates (
bulk charging has timed out and stopped after 24 hours.
Led Power On Led Charging
(rojo) (amarillo)
Alimentación Cargando
Flash
Led Fully Charged
(verde)
Carga finalizada
3
Extinguish
Led Fault
(rojo)
Fallo
Bulk charging
3
) means
3