Installation manual
15.a
Installing the protective covers
(One, Two)
Install the soft washable nylon protective
covers onto the handlebars and the stem.
15.d
Turn the side strip around the column of
the stem and fasten the press stud.
EN
15.b
Installing the protective covers
(Wzoom, Tidit, Mau)
Turn the inner side of the neoprene
cover upwards and from the front of the
scooter fasten the press stud around the
neck of the stem, just below the socket
of the stem.
15.e
Put the foam protection on the bar of the
handlebar and put the neoprene cover
with velcro over it.
15.c
Turn the cover over the socket and the
upper part of the stem.
1.
The stand
The maximum capacity of the stand is
about 15 kg. Do not stand on the parked
scooter.
12