Definitions: Safety Guidelines; General Power Tool Safety Warnings - DeWalt DCF620 Manual De Instrucciones

Definitions: Safety Guidelines

The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
NOTICE: indicates a practice not related to personal injury which, if
not avoided, may result in property damage.
WARNING: To reduce the risk of injury, read the instruction
manual.

General Power Tool Safety Warnings

WARNING! Read all safety warnings and all instructions
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE
The term "power tool"in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
All manuals and user guides at all-guides.com
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the
b) Avoid body contact with earthed or grounded surfaces
c) Do not expose power tools to rain or wet conditions. Water
d) Do not abuse the cord. Never use the cord for carrying,
e) When operating a power tool outdoors, use an extension
f) If operating a power tool in a damp location is unavoidable,
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common
b) Use personal protective equipment. Always wear eye
c) Prevent unintentional starting. Ensure the switch is in the
29
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or
grounded.
entering a power tool will increase the risk of electric shock.
pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
use a residual current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while operating
power tools may result in serious personal injury.
protection. Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
off position before connecting to power source and/or
battery pack, picking up or carrying the tool. Carrying power