DeWalt DCF620 Manual De Instrucciones página 40

To remove the battery pack from the tool, press the release button (E)
and firmly pull the battery pack out of the tool handle. Insert it into the
charger as described in the charger section of this manual.
FIG. 3
F
E
FUEL GAUGE BATTERY PACKS (FIG. 3)
Some D WALT battery packs include a fuel gauge which consists of
e
three green LED lights that indicate the level of charge remaining in the
battery pack.
The fuel gauge is an indication of approximate levels of charge remaining
in the battery pack according to the following indicators:
75–100% charged
51–74% charged
< 50% charged
Pack needs to be charged
To actuate the fuel gauge, press and hold the fuel gauge button (L). A
combination of the three green LED lights will illuminate designating the
All manuals and user guides at all-guides.com
level of charge left. When the level of charge in the battery is below the
usable limit, the fuel gauge will not illuminate and the battery will need
to be recharged.
NOTE: The fuel gauge is only an indication of the charge left on the
battery pack. It does not indicate tool functionality and is subject to
variation based on product components, temperature and end-user
application.
L
For more information regarding fuel gauge battery packs, please contact
call 1-800-4-D
dewalt.com.
Proper Hand Position (Fig. 4)
use proper hand position as shown in Fig 4.
Proper hand position requires one hand on the rear grip. Take care to
not block the air vents (N).
38
WALT (1-800-433-9258) or visit our website www.
e
WARNING: To reduce the risk of serious personal injury, ALWAYS
FIG. 4
N
N