Trust START ACDB-7000BC Manual Del Usuario página 10

EN ACDB-7000BC WIRELESS DOORBELL CHIME WITH BUILD-IN TRANSMITTER
1. Switch off the mains power (electric meter box)
First switch off the mains power before detaching the existing wiring.
2. Detach existing wires
Look for your existing wiring which most of the times leads to your electric meter box and detach
these from the existing installation.
The existing doorbell won't be operational any more.
3. Switch on the mains power (electric meter box)
Do not contact any exposed wiring. Only touch the plastic housing of this product.
4. Open build-in transmitter
Put, for example a coin, in the insert to open the transmitter.
5. Connect transmitter
Connect the wires of the transmitter to the L and N outlets of the lustre terminal.
6. Connect existing wires
Connect the existing wires to the remaining L and N outlets of the lustre terminal.
7. Place chime receiver
Place the chime receiver in a socket.
8. Select melody
Press the [¯] button several times to select 1 of the 5 melodies. You can select a different melody for
each transmitter.
9. Select volume level
Press the volume button [ ] several times to select 1 of the 4 volume levels. You can select a different
volume level for each transmitter.
10. Activate learn-mode
When you have selected the desired volume level and melody, press the [LEARN] button for 1 second
to activate the learn-mode. The learn-mode will be active for 15 seconds and the LED-indicator will
blink slowly.
1