AL-KO Garden + Hobby TOP 1402 KT Manual Del Usuario página 11

Drum and gear rim assembling
Figs. 10 and 11
1. Applying silicone on the lower drum
calculatingly.
2. Put on the upper drum half on the lower
drum half so that the two square holes are
located on each other.
3. Screwing drum with 12 Hexagon-head bolt
M8x16 and plates together.
Mixer metals Assembling
Fig. 12
1. Stick two round head screws with two
sealing of the outside by the square holes.
2. Putting reinforcement's metals and mixer
metal on to the screws and with one washer
each and hexagon screw in, tight screw.
Assembling gear rim protection
Figs. 13 and 14
1. Putting the fastening metal (figure 13) on the
side of the handwheel on the cone.
2. Assembling a half of the gear rim protection
on the two sides and fix screws tangible.
3. Assembling second half of the gear rim
protection and fix screws tangible.
4. Adjust gear rim protection and fix all screws.
Operation
Danger!
!
The concrete mixer must not be
operated if any parts (e.g. guards) are
missing or defective or if the connection
cable is damaged.
Operating the concrete mixer
1. Place the concrete mixer horizontally on
level, solid ground. Do not place the concrete
mixer on the connection cable!
Information:
The drum must be able to swivel to the
right and left. Ensure that there is space
under the drum for emptying the
contents into a wheelbarrow.
2. Lay the connection cable in such a way that
it cannot be kinked, crushed or damaged in
any other way.
3. Plug the connection cable into the machine.
4. Plug the connection cable into the mains
socket.
Fig. 15
1. Switching on: Switch to "1".
2. Switching off: Switch to "0".
Drum positions
Fig. 16
1. Operating position (can swivel to the right or
left).
Information:
When released, the hand wheel must
lock into position in the retention plate.
Fig. 17
Transportation and storage
Warning!
The drum must be rotating when it is
being filled or emptied. Do not overfill
the drum!
1. If there are any prolonged breaks in work,
disconnect the power and safeguard the
concrete mixer to prevent it from being
switched on by unauthorised persons.
Transportation
Danger!
!
Before moving the concrete mixer,
always pull out the machine plug.
1. Swivel down the filler opening.
2. If transporting the concrete mixer by vehicle,
fold in the feet after removing the bolts.
3. Secure the concrete mixer to prevent it from
moving.
Concrete mixer
D 3