Operating The Pump Via Egc - Oase FM-Master WLAN Instrucciones De Uso

7.4

Operating the pump via EGC

"Home" screen
The OASE product name will be displayed at the top right of the screen. The added device can be labelled
with an individual name.
1 Tiles for operation and display of current values.
2 Switching the device on or off.
Tap the touch symbol "On" to switch on the device.
Tap the touch symbol "Off" to switch off the device.
3 EGC connection status
Status display lights up green:
The connection between the EGC device and FM-Master WLAN EGC is active.
Status display lights up grey and the product image is greyed out:
No connection between EGC device and FM-Master WLAN EGC.
Dynamic Function Control (DFC)
Only available for pumps supporting this function. The DFC function is described in the oper-
ating manual of the pump.
How to proceed:
1. Tap "On" or "Off" to switch the DFC function on or off.
If the DFC function is on, the current Scene is displayed.
2. To change the Scene, touch the number of the Scene and hold it for 2 seconds.
A dialogue field will open.
Different Scene are available.
3. Select the desired Scene.
4. Tap ʺOKʺ to apply the setting.
The Scene number is displayed in the tile.
5. To cancel the process, tap "Cancel".
- EN -
FMR0037
55