Installation Instructions; Checking The Installation Enclosure - Bosch B36BT830NS Instrucciones De Instalación

Installation instructions

The following installation instructions describe th e
installation steps for various appliance types.
Therefore the diagrams may be a general representat
of your appliance.
Particular reference is made to special installatio
for individual appliance types.
1.

Checking the installation enclosure

,
All manuals and user guides at all-guides.com
ion
n steps
,

The appliance may tip over while it is being
unpacked.

The appliance is very heavy.

When opening the appliance door,
the appliance may tip forwards.
Note:
Check appliance for damage in transit.
Do not install the appliance if it is visibly damag
If in doubt, contact your dealer.
To avoid floor damage:
1. Remove the packaging cart
damage the surface of appliance.
2. Place packaging cardboard or plywood under the
appliance.
3. Remove accessories from the outside
of the appliance.
Save adhesive tape which was used to attach
the supplied accessories to the appliance.
It can be used subsequently for attaching an edge
protection to the installation enclosure walls
(see section on " A / 3. Attaching an edge
protection").
Note:
Do not remove transportation protection device (a)
from the underside of the freezer compartment
drawer.
4. Remove transportation prot ection devices (b) and lift
appliance off the pallet –
ed.
on and be careful not to
appliance is very heavy!
11