Attaching The Toe Kick Panel; Aligning The Base Panel - Bosch B36BT830NS Instrucciones De Instalación

4.

Attaching the toe kick panel

Note:
Risk of damage to the applia nce. Do not cover ventilation
slots in the base panel.
Nominal dimensions to be observed:
Stainless steel panel (accessory)
1. Attach the base panel to the appliance (do not
screw on).
2. Remove the protective film from the adhesive pads
3. Fit the toe kick panel to the base panel and pres
firmly into place.
All manuals and user guides at all-guides.com
Wooden panel
1.
2.
5.
1.
.
2.
3.
s
4.
If required, shorten wooden panel to the required
length.
Screw wooden panel to the base panel from behind.
There are already screw holes in the base panel.

Aligning the base panel

Put on the base panel (do not screw on) and
measure the difference in depth
panel and toe kick panel
Remove the base panel.
Adjust the brackets (a) to the dimensions
tighten.
Attach the base panel.
A between the base
of the adjacent cabinet.
A and
21