Intended Use; Safety Notes; Environmental Protection - BGS technic 9273 Manual De Instrucciones

Piston Height Adjustment Tool | M14 x 1.25
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third-parties.

INTENDED USE

The tool is required for adjusting the ignition timing on two-wheels with spark plug thread M14
x 1.25. To adjust the ignition timing, the precise piston height (dimension before TDC) can be
set on the existing knurled sleeve.

SAFETY NOTES

Keep children and other unauthorised persons away from the work area.
•
• Do not let any children play with the tool or its packaging
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
• Never place the contained tools on the vehicle battery. Danger of short circuit.
Caution when working on the running engines. Loose clothing, tools and other objects may be
•
caught by rotating parts and cause severe injuries.
• Be careful when working on hot engines because of the risk of burn injuries!
If you remove the ignition key before repairing, this will prevent the engine from being started
•
accidentally and result in engine damage and injuries.
• These instructions serve as brief information and never replace the workshop manual. Please
always obtain technical specifications such as torque values and instructions on disassembly
and assembly from the vehicle-specific service literature.

ENVIRONMENTAL PROTECTION

Recycle undesired materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in an
environmentally friendly manner. Check with your local waste disposal authority about
recycling measures. Dispose of this product in an environmentally friendly manner at the
end of its life
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9273
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed