JBM 53609 Manual De Instrucciones página 4

EN
MANUAL OF INSTRUCTIONS
CAUTION: Please read this manual carefully before operating the pump.
CHAPTER 1
Technical Specifications
Rated Voltage
Rated Power
Max Lift
Max Suction
CHAPTER 2
Warning
• The user must absolutely observe the accident-pre-
vention measures in force, and must also respect
the indications provided in the following chapters
• Never shift the motor pump during operation for
any reason whatsoever
• Before using the motor pump, always make sure
that the power supply cable and all the other devi-
ces are in perfect working condition
• Before starting the motor pump, make sure that you
are not barefoot, that your hands are not wet, and
that you are not even partially standing in water
• The motor pumps are constructed in such way that
all the moving parts are protected by casings Ne-
ver remove any of these casings when the motor
pump is running for any reason whatsoever
• It is very important to keep the motor pumps' power
socket protected from sprays of water, rain and
atmospheric agents in general and all the other
liquids
• Not for use with gasoline or alcohol
• Not for use in hazardous locations
• Improper use or installation of this product can cau-
se serious bodily injury or death
• Do NOT smoke near pump or use pump near an
open flame.
• Do not use this product for fluid transfer into air-
craft
• This product is not suited for use with fluids for hu-
man consumption or fluids containing water.
• Do not dispense fluid that is thicker than diesel fuel.
Motor may overheat
SAFETY INSTRUCTIONS
To ensure safe and efficient operation, it is essential to
read and follow each of these
warnings and precautions
1 Disconnect power to pump before servicing
pump
2 A diesel compatible filter should be used on
pump outlet to ensure that no foreign material is
transferred to fuel tank
3 Tank or barrel should be anchored to prevent tip-
ping in both the full and empty conditions
4 The pump should never be left running unatten-
ded
CHAPTER 3
Handing and transport
3.1 Unpacking
Whenever the packaging appears to have been dama-
ged, check the motor pump for signs of damage during
transport of handling
WARNING: Before installing and using the motor
pump, check the identification plate to
make sure that the model and its characteristics co-
rrespond to those specified.
3.2 Handling disassembly and transport
Although the reduced size and weight of the motor
pump will not create particular problems in transport,
we recommend the following:
• Never move the motor pump for any reason without
first unplugging the power supply plug from the
socket or disconnecting the electrical power supply
• Unscrew and remove the delivery and suction tu-
bes
• Unscrew the bolts or screws used to anchor the
motor pump in place
• Never move or drag the motor pump by pulling its
power supply cable
CHAPTER 4
Use and starting
4.1 Electrical power supply connection:
1 Connect the pump's clamps to a battery capable of
delivering the current and voltage required for the
operation of the pump
2 If a motor vehicle battery is used to power the
pump, we recommended first removing it from the
vehicle and standing it on a stable surface in a
comfortable position
3 The pump can be connected to a battery mounted
in a motor vehicle only if the vehicle is parked out-
doors and only if the pumps' electrical cables and
connection piping are long enough to provide the
pump with solid support
4 The use of extension cords for the electric cables
connected to the clamps is prohibited If the leng-
th of the cables supplied with the machine is not
sufficient to power the pump, the clamps must be
substituted with jack plugs of adequate section by
a specialized electrician
5 The pump can be connected to a battery-charger
only of adequate power equipped with terminals,
never make connections to clamps coming from
· 4 ·
REF. 53609
DC12V
175W
10m
3m