Assemble Hose, Extension, Shut-Off & Nozzle; Operation - Smith XP100P Manual De Instrucciones

Assemble Hose, Extension, Shut-Off & Nozzle
1. Attach hose to Shut-Off and tighten securely
using a 9/16" Wrench, use a 3/4" Wrench to hold
the Shut-Off handle while tightening the hose.
2. Install the extension onto the Shut-Off assembly
and tighten the nut securely using a 13/16"
wrench.
3. Install selected nozzle into the extension nut
and tighten nut securely using a 13/16" wrench.
Insert check valve if required as shown.
2
1

OPERATION

WARNING: RISK OF PERSONAL INJURY DUE TO
CHEMICAL EXPOSURE. Use the appropriate Personal
Protective Equipment (PPE) as recommended by the
chemical manufacturer and/or refer to the chemical
Safety Data Sheet (SDS) of the chemical being used.
This includes at least goggles, gloves, and protective
clothing.
WARNING: To reduce the risk of serious personal
injury, turn unit OFF before making any adjustments
or removing/ installing attachments or accessories.
An accidental start-up can cause injury.
NOTICE: The battery is not fully charged out of the
carton. Before using read the safety instructions
below and then follow the charging procedures
outlined.
3
A Power Button
B Light
C Charging Port Cover
D Charging Port
E Handle
A
B
C
D
H
ENGLISH
E
F
G
I
F Pump Zero Pump
G Ressure Release Valve
H Nozzle, 4 Way, Brass,
SPS
I Unijet Tip SS, Nozzle
50015E-SS
5