Using The Radio - Silvercrest 282352 Instrucciones De Utilización Y De Seguridad

Note: The charging process using the hand
crank takes some time before the battery volt-
3
age is high enough for mobile devices; this depends
on the product's battery power.

Using the radio

Switch the product on by setting the ON / OFF
switch to the ON position.
5
Press the RADIO button on the control panel
6 f 6
and hold it down for roughly 3 seconds to switch
on the radio.
Press the SCAN+ or the SCAN button to
6 e 6 b
search for a broadcasting station during playback.
The automatic search for radio stations will begin
and will be interrupted if a broadcasting station
with a sufficient signal strength is found. To search
for another broadcasting station, go through the
same process as described above. You can search
forwards for broadcasting stations using the SCAN +
button (frequency range of 87.5 MHz to 108
6 e
MHz) or backwards using the SCAN– button
6 b
(108 MHz to 87.5 MHz).
GB/MT 73