Switching The Alarm Off; Storage When Not Using The Product - Silvercrest SIRD 14 D1 Manual De Instrucciones

If no Internet connection is available, the buzzer will sound.
[Preset:] This lets you select the radio station you would like to wake you up. You can select the
"Last listened" option or choose a station from your favourite list. Please note that this function is not
available if the "Buzzer" option has been selected.
[Volume:] Rotate the NAVIGATE knob [5] to set the wake-up volume you want. Press the
NAVIGATE knob [5] to confirm.
[Save] Select this option and press the NAVIGATE knob [5] to save the settings. After an alarm
has been enabled, the display [2] shows a bell icon 1 (Alarm 1) or 2 (Alarm 2). In standby mode,
the alarm time set is also shown on the display [2].

13.3 Switching the alarm off

When the alarm starts, you can disable it as follows.

By repeatedly pressing the Navigate knob [5] or the SNOOZE button [21] on the remote
control, you can delay the alarm for 5, 10, 15 or 30 minutes. After this period, the alarm starts
again. The remaining snooze time before alarm reactivation appears at the bottom of the
display [2].

Press and hold the VOLUME knob [10] or the On/Standby button [53] of the remote control
for approx. 2 seconds to quit the alarm.

13.4 Storage when not using the product

If you will not be using the device for a long period of time, unplug it from the mains
and store the device in a dry and cool place. Also remove the batteries from the
remote control.
SilverCrest SIRD 14 D1
English - 107