Cleaning, Storage And Maintenance; Troubleshooting - Cuisinart Core Custom MCH-4 Serie Manual De Instrucciones & Libro De Recetas

spatula. You can also remove ingredients while
the bowl is still on the base.
NOTE: HANDLE WITH CARE – THE BLADE
IS RAZOR SHARP.
Tips: When making a recipe that involves multiple
steps, always process the dry ingredients first and
then the wet, to avoid having to clean the bowl and
blade between each task.
Never operate the Cuisinart Core Custom
®
4-Cup Chopper/Grinder without ingredients in the
work bowl.
CLEANING, STORAGE AND
MAINTENANCE
To simplify cleaning, rinse the work bowl, cover,
and blade immediately after each use so that food
won't dry on them. Wash blade, work bowl, cover,
and spatula in warm, soapy water. Rinse and dry.
Wash the blade carefully. Avoid leaving blade in
soapy water where it may disappear from sight.
The work bowl and cover can be washed on the
top rack of a dishwasher. Insert the work bowl
upside down and the cover right side up. The
blade and spatula can be washed in the cutlery
basket. Unload the dishwasher carefully to avoid
contact with the sharp blade. Wipe the motor
base clean with a damp sponge or cloth. Dry it
immediately. Never submerge the motor base or
the plug in water or other liquids.
The Cuisinart Core Custom Series 4-Cup
® ™
Chopper/Grinder stores neatly on the countertop.
When it is not in use, be sure to leave it unplugged.
The hidden cord storage underneath the motor
base will help to keep excess cord off the
countertop. Store the unit assembled to prevent
loss of parts. Store the blade as you would sharp
knives – out of the reach of children.
The Cuisinart Core Custom
®
Chopper/Grinder is intended for HOUSEHOLD
USE ONLY.
Maintenance: Any service other than cleaning and
normal user maintenance should be performed by
an authorized Cuisinart Service Representative.

TROUBLESHOOTING

Motor doesn't start or blade doesn't rotate.
Series
™
• Check that plug is securely inserted into outlet.
• Check that work bowl and cover are securely
locked into place.
• Be sure to press only one operation control
button at a time.
• This appliance comes with a resettable
protection device to prevent damage to the
motor in the case of extreme overload. Should
unit shut off unexpectedly, unplug it and let it
cool for at least 15 minutes before continuing.
Food is unevenly chopped.
• Try cutting food into smaller, even-sized pieces.
• Try processing smaller amounts of food per
batch.
Food is chopped too fine or is watery.
• The food has been overprocessed. Use brief
pulses, or process for a shorter time. Let blade
stop completely between pulses.
Food collects on work bowl cover or sides of
prep bowl.
• This is normal; turn machine off. When blade
stops rotating, remove cover and clean bowl
and cover with spatula.
Food catches on blade.
• You may be processing too much food.
Carefully remove blade. Remove food from
blade with spatula and begin processing again.
™ Series 4-Cup
5