Before You Start; Installing And Replacing The Batteries - Duronic BPM120 Manual De Instrucciones

1. Battery powered mode: 6VDC 4*AAA batteries
2. AC adaptor powered mode: 5V
Corresponding AC adapters with USB cables are widely
available.
If in doubt, contact Duronic for advice.
Caution: In order to get the best effect and protect your monitor,
please use the right battery and special power adapter
Do not use different types of batteries together.

Installing and Replacing the Batteries

1. Slide off the battery cover.
2. Install the batteries by matching the correct
polarity, as shown.
3. Replace the cover.
Replace the batteries whenever the below
happens:
- The symbol shows
- The display dims
- The display does not light up
Caution:
Remove batteries if the device is not likely to be used for some time.
Old batteries are harmful to the environment - do not dispose of with
other daily rubbish. Remove the old batteries from the device and
follow your local recycling guidelines. Do not dispose of batteries in
fire - batteries may explode or leak.
Choice of Power Supply
1A (not included)
11
AC adaptor
.