Technical Data; Reciprocating Saw; Vibration Information; English - Milwaukee SSD 1100 X Manual Original

TECHNICAL DATA

Reciprocating Saw

Production code
Rated input
Output
Stroke rate under no-load
Lengths of stroke
Weight according EPTA-Procedure 01/2014
Noise information
Measured values determined according to EN 62841. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!

Vibration information

Vibration total values (triaxial vector sum) determined according to EN 62841
GB
Cutting boards *1:
Vibration emission value a
Uncertainty K=
Cutting wooden beams *2:
Vibration emission value a
Uncertainty K=
*1 with sawblade dimension 150 x 1,4/1,9 mm and tooth pitch 4,2 mm, 6 Tpi
*2 with sawblade dimension 150 x 1,4/1,9 mm and tooth pitch 4,2 mm, 6 Tpi
WARNING
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in EN
62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration and noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
Wear ear protectors. Exposure to noise can cause hearing loss.
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
SABRE SAW SAFETY WARNINGS
Hold the power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory con-
tacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
Use clamps or another practical way to secure and support
the workpiece to a stable platform. Holding the workpiece by
hand or against your body leaves it unstable and may lead to loss
of control.

English

6 6
h, B
h, WB
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is re-
commended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Do not reach into the machine while it is running. Chips and splin-
ters must not be removed while the machine is running.
Always use the protective shields on the machine.
Do not use cracked or distorted saw blades.
When working in walls ceiling, or floor, take care to avoid electric
cables and gas or waterpipes.
SSD 1100 X
4587 55 03 ...
4587 59 03 ...
... 000001-999999
1100 W
550 W
0-3000 min
-1
28 mm
3,2 kg
91 dB (A)
102 dB (A)
25,8 m/s
2
1,8 m/s
2
24,11 m/s
2
2,0 m/s 2