Carrier 40VCI67FQEE Manual Del Usuario página 2

REMOTE CONTROLLER OPERATION MANUAL
External View of Remote Controller
Remote Controller Function description : This remote
controller is a general remote Controller. Some functions
are valid according to the adaptable model.
Functional description
1.ON/ OFF Button :
Turn on the units: Press the
the units.
Note : The initial default operation is in AUTO mode and it
will display the mode before turning off.
Press button again to turn off the unit.
2. Temperature +/- Button :
(1) This button is invalid in FAN mode.
(2) By pressing the button once, the temperature will
increase or decrease by 0.5°C. Pressing and holding the
button will change the temperature quickly.
3. FAN SPEED Button :
Press the button to change the speed. The sequence
is as follows:
4. QUIET
Press button, the controller screen will display " ".
The fan speed in Quiet function is automatic, however the
specific fan speed grade in auto will depend on the indoor
unit.
Note: This function is valid under the mode of COOL and HEAT.
5. COOL/ HEAT
Press button and
mode and HEAT mode.
6. MODE
If you press the button, the sequence is as follows :
7. IFP/
(1) Press button, to set and cancel the IFP func-
tion,.
(2) Press button, for display
sensing ; press it again, for display
but by avoiding direct airflow towards humans. Press it the
third time to cancel this function.
(3) Airflow angle will adjust automatically as per the
location of people. At the same time,
disappear.
1
button to turn on
button to execute COOL
of human
of human sensing
, and will
Auto Auto