Clamp Meter; Symbols; Instructions - koban KP-05 Manual De Instrucciones

All manuals and user guides at all-guides.com

Clamp meter

* Change the battery when the

1.1.3 Symbols:

Symbols used in this manual and on the instrument:
Caution: refer to the instruction manual. Incorrect use may result in damage
to the device or its components.
Earth
~ AC (Alternating Current)
DC (Direct Current)
AC or DC
Conforms to European Union directives
This instrument has double insulation.

1.1.4 Instructions

* Before opening up the instrument, always disconnect from all sources of electric current
and make sure you are not charged with static electricity, which may destroy internal
components.
* Any adjustment, maintenance or repair work carried out on the clamp meter while it is
live should be carried out only by appropriately qualified personnel, after having taken
into account the instructions in this present manual.
* A "qualified person" is someone who is familiar with the installation, construction and
operation of the equipment and the hazards involved. He is trained and authorized
to energize and de-energize circuits and equipment in accordance with established
practices.
* When the instrument is opened up, remember that some internal capacitors can retain
a dangerous potential even after the instrument is switched off.
* If any faults or abnormalities are observed, take the instrument out of service and ensure
that it cannot be used until it has been checked out.
* If the meter is not going to be used for a long time, take out the battery and do not store
the meter in high temperature or high humidity environment.
symbol appears to avoid incorrect data.
50