Diode Test; Continuity Check; Temperature; General Maintenance - koban KP-05 Manual De Instrucciones

All manuals and user guides at all-guides.com
Clamp meter

4.2.4 Diode Test

Function Resolution
0.001V
Overload protection: 250V DC or 250V AC rms.

4.2.5 Continuity Check

Function Range
200
Overload protection: 250V DC or 250V AC rms.

4.2.6 Temperature

Function Range
-20ºC ~0ºC
ºC 0ºC ~400ºC
401ºC ~750ºC
Overload protection: 250V DC or 250V AC rms.
Temperature specifications do not include thermocouple errors.
5. MAINTENANCE
This section provides basic maintenance information, including battery replacement
instructions.
Do not attempt to repair or service your Meter unless you are qualified to do so and have
the relevant calibration, performance test, and service information.

5.1 General Maintenance

To avoid electrical shock or damage to the meter, do not get water inside the
case. Remove the test leads and any input signals before opening the case
Periodically wipe the case with a damp cloth and mild detergent. Do not use abrasives or
Test Condition
Forward DC current approx. 1mA.
Reversed DC voltage approx. 1.5V.
Resolution Description
Continuity
0.1
beeper75
Resolution
1ºC
60
Accuracy
1.0% uncertainty
Test Condition
Open circuit voltage:
approx. 0.5V
Accuracy
(5.0% of rdg + 4ºC)
(1.0% of rdg+3ºC)
(2.0% of rdg+3ºC)