BASIC OPERATION
0.6
0.6
m
m
(2
)
(2
)
ft
ft
FREE AREA
ADJUST
HEIGHT
LOCK
ADJUSTMENT
LOCATION OF THE EXERCISE BIKE
Place the exercise bike on a level surface. There should be one foot in front of
the exercise bike for the power cord. For ease of access, there should be an
accessible space preferentially on both sides of the exercise bike equal to 2 ft (0.6
meters) to allow a user access to the machine from either side. Do not place the
exercise bike in any area that will block any vent or air openings. The exercise bike
should not be located in a garage, covered patio, near water or outdoors.
MOVING THE EXERCISE BIKE
Your exercise bike has a pair of transport wheels built into the front stabilizer
tube. Remove the power supply before attempting to move the bike.
WARNING!
Our exercise bikes are heavy, use care and additional help if necessary when
moving. Failure to follow these instructions could result in injury.
LEVELING THE EXERCISE BIKE
Your exercise bike should be level for optimum use. Once you have placed your exercise
bike where you intend to use it, raise or lower one or both of the adjustable levelers
located on the bottom of the frame. A carpenter's level is recommended. Once you
have leveled your exercise bike, lock the levelers in place by tightening the nuts against
the frame. Actual levelers may differ from image and may not include the lock.
POWER
Your exercise bike is powered by a power supply. The power must
be plugged into the power jack, which is located in the front of the
machine near the stabilizer tube. Unplug cord when not in use.
WARNING!
Never operate product if it has a damaged cord or plug, if it is not working
properly, if it has been damaged, or immersed in water. Please reference
contact information on the INFORMATION CARD for assistance.
UPRIGHT BIKES: firmly grasp the
handlebars, carefully tip toward you,
and roll on the transport wheels.
RECUMBENT BIKES: firmly grasp the
steel portion of the rear stabilizer
tube, carefully lift and roll on the
transport wheels.
5