Matrix Johnson ICR50 Manual De Instrucciones página 7

TROUBLESHOOTING
COMMON PRODUCT QUESTIONS
ARE THE SOUNDS MY EXERCISE BIKE MAKES NORMAL?
Our exercise bikes are some of the quietest available because they use
belt drives and friction free magnetic resistance. We use the highest grade
bearings and belts to minimize noise. However, because the resistance
system itself is so quiet, you will occasionally hear other slight mechanical
noises. Unlike older, louder technologies, there are no fans, friction
belts, or alternator noises to mask these sounds on our exercise bikes.
These mechanical noises, which may or may not be intermittent, are
normal and are caused by the transfer of significant amounts of energy
to a rapidly spinning flywheel. All bearings, belts and other rotating
parts will generate some noise which will transmit through the casing
and frame. It is also normal for these sounds to change slightly during
a workout and over time because of thermal expansion of the parts.
WHY IS THE EXERCISE BIKE I HAD DELIVERED
LOUDER THAN THE ONE AT THE STORE?
All fitness products seem quieter in a large store showroom because
there is generally more background noise than in your home.
Also, there will be less reverberation on a carpeted concrete floor
than on a wood overlay floor. Sometimes a heavy rubber mat will
help reduce reverberation through the floor. If a fitness product
is placed close to a wall, there will be more reflected noise.
HOW LONG WILL THE DRIVE BELT LAST?
The computer modeling we have done indicated virtually
thousands of maintenance free hours. You should not have to
replace the belt as long as you have the exercise bike.
CAN I MOVE THE EXERCISE BIKE EASILY ONCE IT IS ASSEMBLED?
Your exercise bike has a pair of transport wheels built into the front
stabilizer tube. Please follow the MOVING THE EXERCISE BIKE section to
transport your exercise bike. It is important that you place your exercise
bike in a comfortable and inviting room. Your exercise bike is designed
to use minimal floor space. Many people will place their exercise bikes
facing the TV or a picture window. If at all possible, avoid putting your
exercise bike in an unfinished basement. To make exercise a desirable daily
activity for you, the exercise bike should be in a comfortable setting.
BASIC TROUBLESHOOTING
PROBLEM: The console does not light up.
SOLUTION: Verify the following:
• The outlet the machine is plugged
into is functional. Double check
that the breaker has not tripped.
• The correct power cord is being used.
Only use the power cord provided.
Test the voltage on the power cord
to verify it provides the specified
output voltage from the label.
• The power cord is not pinched or
damaged and is properly plugged
into the outlet AND the machine.
• Unplug power cord, remove the
console and check that all connections
to the console are secure and not
damaged or pinched. Unplug then
reconnect the console cable.
PROBLEM: The console lights up but the
Distance/Watts/RPMs do not count.
SOLUTION: Verify the following:
• Unplug power cord, remove the
console and check that all connections
to the console are secure and not
damaged or pinched. Unplug then
reconnect the console cable.
• If doing the above does not fix the
problem, the speed sensor and/
or magnet may have become
dislodged or damaged.
PROBLEM: The resistance levels seem to be
incorrect, seeming too hard or too easy.
SOLUTION: Verify the following:
• The correct power cord is being used.
Only use the power cord provided.
• Reset the console and allow
the resistance to reset to the
default position. Restart and
retry the resistance levels.
PROBLEM: The exercise makes a clicking
noise or feeling from the pedals.
SOLUTION: Verify the following:
• Verify the bike is on a level surface.
• Remove the pedals, apply blue thread-
locker to the threads and re-tighten
the pedals using an open wrench.
PROBLEM: The exercise bike makes
a squeaking or chirping noise.
SOLUTION: Verify the following:
• The exercise bike is on a level surface.
• Loosen all bolts attached during
the assembly process, grease the
threads, and tighten again.
FOR CYCLES WITH SPEAKERS:
PROBLEM: When MP3 player is connected
there is no sound coming from the
speakers or the speakers sound fuzzy.
SOLUTION: Make sure audio cable
is plugged in securely to both the
console and MP3 Player jacks.
7