HOLZMANN MASCHINEN BS 115N Manual De Instrucciones página 5

After both bearing rollers are adjusted free of play, the two nuts tighten up the leadership ro-
les.
Example of a perfect adjustment of the bandsaw blade guide:
The bandsaw blade has too much play and is
therefore still cant between the lateral bearing
rollers
.
CAUTION:
Before tightening the bandsaw blade guide examine
whether the saw band is below set perfectly vertical
and readjust the bandsaw blade guide according ver-
tically.
The bandsaw blade guide with the screw for fixing
tighten.
NOTE: Check the 90 ° bandsaw blade guide with an angle gauge or with a rectangular workpiece.
Repeat this process on the right if the saw band saw blade guiding is not performed exactly verti-
cal.
CAUTION:
Bevel cuts are resulting from not exactly vertical set saw blade guides and too much
play between the lateral bearing rollers!
NOTE: The bandsaw blade guide slide (left / right) as close as possible to the workpiece.
By loosening the fixing nuts (12), the blade guides can
be moved.
HOLZMANN Maschinen Austria  www.holzmann-maschinen.at
Bedienungsanleitung Metallbandsäge BS 115N
The saw blade is completely vertically without
any play between the lateral bearing rollers.
PRODUKTBEOBACHTUNG
Metallbandsäge
Seite 5
BS 115N