Troubleshooting - Brandt Four Manual De Instrucciones

EN

7 / TROUBLESHOOTING

If you have a doubt about the correct functioning of your oven, this does not necessarily mean
that there is a malfunction. Check the following points:
YOU NOTICE THAT...
The oven is not heating.
* The padlock is flashing
The oven light is not working.
* The pyrolysis cleaning cycle
does not begin.
The cooling fan continues to
operate after the oven stops.
* Only for models with the pyrolysis function.
Caution
- Repairs to your appliance should only be performed by a professional.
Non-standard repairs may be a source of danger for the user.
Tip
If your intervention is not enough, contact the After-Sales Service without delay.
POSSIBLE CAUSES
-The oven is not connected to
the power supply.
-Your fuse is not working.
- The selected temperature is
too low.
-Problem with the door's
locking mechanism.
-The light is out of order.
-The oven is not connected or
the fuse has blown.
-The door is not properly
closed.
-The locking system is
defective.
- The fan continues to work
after cooking.
EN-18
WHAT YOU SHOULD DO:
> Connect the oven.
> Replace the fuse in your
electrical set-up and check its
capacity (16A).
> Increase the selected
temperature.
> Call the After-Sales Service
Department.
> Replace the bulb.
> Connect the oven or replace
the fuse.
> Check that the door is
closed.
> Call the After-Sales Service
Department.
> Open the oven door to cool
down the oven faster.