Publicidad
•
Loading the dishes in the racks.
- In the lower rack.
plates (load the deep ones on the right and the shallow ones on the left). The dishes
should always tilted towards you and make sure that there is sufficient clearance between
them so that the water spray can reach and clean them. Saucepans always upside-down.
If your dishwasher has folding supports, you can use them in the vertical position for
plates and in the horizontal position for large items of crockery.
- Cutlery basket.
This is where the cutlery goes; it is located in the lower basket. The separate
compart-ments allow you to segregate the different items always with the handle down.
- In the upper rack.
that their rims face down (upside-down). Lead crystal should not be washed in the dish-
washer, continued washing will make it go cloudy and it will lose its shine. When the half-
load function is activated, in those dishwashers which have it, all the items must be put
in this basket, even cutlery (which will be put in one of the parts of the double cutlery
basket which is normally at the bottom).
Once you have loaded
without hitting any plate, piece of cutlery, handle, etc.
Do not hang objects from the baskets as it will impede the spray arm rotation.
For IEC regulation EN-50242
All manuals and user guides at all-guides.com
The dirtiest and most resistant dishes, casseroles, oven dishes and
The more delicate dishes. Cups, glasses and porcelain. Take care
the dishes and cutlery, make sure that the spray arms
For IEC regulation EN-50242
For IEC regulation EN-50242
revolve
32
Publicidad
Capítulos
