Choosing A Projector Set; Changing A Projector Set; Optional Accessories - Titan MAXUM ELITE Manual Del Propietário

choosing a Projector Set

Your HVLP spray gun should be fitted with the proper projector
set for the type of work you will be performing. A projector set
consists of a needle assembly, a fluid nozzle, and an air cap.
Needle assembly
Fluid nozzle
You should choose a projector set based on two things: the type
of material to be sprayed and the finish desired.
The chart on the following page should help you to make the right
choice.

changing a Projector Set

1. Remove the air cap ring, air cap, and spring plate.
2. Remove the fluid nozzle.
3. Separate the gun head from the gun rear (see instructions
on page 3).
4. Remove the needle.
IMPORTaNT: If the needle does not slide out easily, loosen
the packing nut to prevent the needle or packing from being
damaged.
5. Install the new projector set in reverse order.
English
Air cap
Air cap ring
Air cap
Spring plate

Optional accessories

Part Number Description
0524293 Projector set, #2 complete
0524294 Projector set, #3 complete
0524295 Projector set, #4 complete
0524296 Projector set, #5 complete
0524297 Projector set, #6 complete
0524298 Projector set, #7 complete
0276449 Air cap, #2
0276452 Air cap, #3
0276455 Air cap, #4
0276458 Air cap, #5
0276417 Air cap, #6
0524401 Air cap, #7
0276446 Nozzle, #2
0276451 Nozzle, #3
0276454 Nozzle, #4
0276457 Nozzle, #5
0276418 Nozzle, #6
0524363 Nozzle, #7
0524282A Needle assembly, #2
0524283A Needle assembly, #3
0524284A Needle assembly, #4
0524285A Needle assembly, #5
0524286A Needle assembly, #6
0524287A Needle assembly, #7
0508124 Cover, clip-on, 1 quart
0524188 Tip accessory kit
0524189 Deluxe tip accessory kit
0524271 Cup assembly
0524045 Top feed cup assembly
Repair kits
Part Number Description
0276257 Check valve membrane kit
(includes 10 membranes)
0297052 Gasket, cup, white (includes 6 gaskets)
0524507 Nozzle key
0524187 HVLP gun repair kit
Includes:*
• air valve seal (0277486)
• rear air valve seal (0275501)
• needle packing (0275579)
• check valve retainer assembly (0529220)
• gun body o-ring (0524618)
• air flow valve o-ring (0508403)
• check valve seal (0276415)
• cup gasket (0277495)
• gun head seal (0524503)
* See parts lists on page 32-35 for part locations.
United States Sales & Service
Phone: 1-800-526-5362
Fax: 1-800-528-4826
1770 Fernbrook Lane
Minneapolis, MN 55447
www.titantool.com
10
Canadian Branch
Phone: 1-800-565-8665
Fax: 1-800-856-8496
200 Trowers Road, Unit 7B
Woodbridge, Ontario L4L 5Z8
© Titan Tool Inc. All rights reserved.