Installation Steps; Care And Cleaning - LUND AVS Bugflector Instrucciones De Instalación

Installation Steps

Expose 2" (5 cm) of tape liner from each end
of the flanges on the hood shield.
3
Remove remainder of tape liners. Apply strong
pressure at all contact points for proper adhesion.
5
Close hood.
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade
™
NOTE: Actual application may vary slightly from illustrations.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2007 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo, Chromeflector
TM TM
Center part on front edge of hood. Slide flanges
4
Secure with (4) self tapping screws through
6
NOTE: DO NOT OVER TIGHTEN
Apply bump ons to surface of hood.
rubber trim
8
, and the AVS logo are trademarks of Lund International, Inc.
TM TM
Page 2 of 2
under rubber trim.
hood shield into sheet metal.
Bump-on
hood
washer
screw
hood shield