BlackBull BIGQUBE Manual Del Usuario página 14

EN
Assembly instructions:
Please consciously work through the following four steps one after the other and pay attention to the
necessary care.
1. Once the packaging material has been removed, place
the base on a levelel surface.
Flammable or heat-sensitive objects must be kept in a suf-
ficient distance.
The BigQube looks best when it is completely „free", e.g.
in the lawn and accessible from all sides.
Align the base with the aid of a spirit level so that it is
leveled in all directions.
When choosing the location, also take into account that
stains may appear on the floor due to grease. Due to the
corten base - but also due to the painted base - discolo-
ration of the floor may occur as a result of weathering.
2. Now place the bowl exactly on the base so you can
insert the 4 screws through the holes from below the base
and secure them from above with one of the nuts supplied.
Work together with at least one other person. For the
painted version, make sure that the tub is placed as cen-
tered as possible on the base as „sliding" the bowl back
and forth on the base can cause scratches and damage to
the paint. The screw connection between the base and the
bowl ensures a secure stand.
3. The next step is to place the two heat shield plates un-
der the ring burner as shown in Figure 3. Make sure that
they are positioned accurately and that neither the cable
of the piezo ignition nor the cable of the ignition fuse is
„squeezed off".
BlackBull GmbH • Frankenhof 6 • 74245 Löwenstein • Germany • Phone: +49 7130 402 588 • bbq@blackbull-grill.de • www.blackbull-grill.de
14