YATO YT-3617 Manual Del Usuario página 10

All manuals and user guides at all-guides.com
GB
pressure may be regulated. Make sure that the processed object is properly fi xed and will not move during processing.
Personal safety
Work in good physical and psychological condition. Pay attention to what you are actually doing. Do not work if you are tired or
under infl uence of medicines or alcohol. Even a moment of distraction during work may lead to serious injuries. Use personal
protection. Wear protective goggles. Using personal protections like anti-dust masks, protective shoes, helmets or hearing
protector reduces the risk of serious injuries. While operating a pneumatic tool, wear protective gloves in order to protect yourself
from mechanic injuries and thermal infl uence of the tool. Avoid starting the tool by chance. Make sure the switch is in the position
„OFF", before the tool is connected to the compressed air tank. Keeping a fi nger on the switch or connecting of the tool when
the switch is in the position "ON" may cause serious injuries. Before the pneumatic tool is connected, remove all the wrenches
and other tools that were used for adjustments. A wrench that is left on mobile parts of the tool may cause serious injuries. Keep
balance. During the whole period of work, keep an appropriate position. It will facilitate the operation of the pneumatic tool in the
case of unpredictable situations during work. Use protective clothes. Do not wear loose clothes or jewellery. Keep the hair, clothes
and gloves away from the mobile parts of the tool. Loose clothes, jewellery or long hair may get caught in the mobile parts of
the tool. Use dust removing systems and dust containers if the tool is equipped with them. Connect it correctly. A dust removing
system diminishes the risk of serious injuries. The feeding duct is under pressure what may cause its dynamic movements and
serious injuries.
Operating of a pneumatic tool
Do not use the tool in a manner that does not correspond to its purpose. Do not overload the pneumatic tool. Use a proper tool
for a given job. Do not exceed the maximum acceptable working pressure. A proper choice of tool for a given job will guarantee
more effi cient and safer operation. Before the tool is regulated, accessories changed or the tool stored, the feeding duct must
be disconnected. Thus the pneumatic tool is protected from casual switching it on. Store the tools away from children. Do not
permit operation of the tool by persons that have not been trained as far as its operation is concerned. The tool must be properly
maintained. Check the tool for lack of adjustment and play of mobile parts. Check if any element of the tool is damaged. In the case
if any defects are detected, they must be repaired before the pneumatic tool may be used. Many accidents are caused by incorrect
maintenance of tools. Cutting tools must be kept clean and sharp. Properly kept cutting tool is easier to control during operation.
Use pneumatic tools and accessories with accordance to the above mentioned instructions. Use the tools with accordance to their
purpose, taking into account the type and conditions of work. Using the tools for purposes that differ from those for which they were
designed, increases the risk of dangerous situation. While operating a pneumatic tool, take into account a possibility of fracturing
the working tool, what may cause expulsion of its parts at a high velocity and lead to serious injuries. Make sure the tool is rotating
in a correct direction. Unexpected direction of rotation may be a cause of a dangerous situation. Do not place hands near the
mobile elements of the pneumatic tool, since it may cause serious injuries. In the case the socket of the collector is damaged,
there is a risk of expulsion of parts of the tool at a high velocity and lead to serious injuries. As result of the turning moment, the
tool or the reaction stick may turn. It may lead to serious injuries if the body of the operator is within the range of the turning tool
or the reaction stick. Adopt an appropriate position during work and be prepared for a turn of the tool. Solely the equipment that
is destined to function with pneumatic tools may be used. Using inappropriate equipment may lead to serious injuries. In the case
the power supply is suddenly interrupted, the switch of the tool must be immediately released.
Repair
The tool may be repaired solely in authorised service points which use only original spare parts. It will guarantee an appropriate
level of safety of the pneumatic tool. Do not clean the pneumatic tool with petrol, solvents or another infl ammable liquid. The fumes
may ignite causing an explosion of the tool and serious injuries. The tool may only be maintained with high quality materials. It is
prohibited to use substances other than those mentioned in the service manual. Before the inserted tool is replaced or dismantled,
disconnect the compressed air supply duct.
CONDITIONS OF OPERATION
Make sure the source of compressed air permits to reach the adequate operating pressure and the required air fl ow. If the air
pressure is too high, it is necessary to use a reducer with a safety valve. The pneumatic device must be powered through a fi lter
and lubricator system. It will guarantee cleanliness and lubrication of the air with oil. The conditions of the fi lter and the lubricator
must be revised before each use and, if necessary, the fi lter must be cleaned and the level of oil in the lubricator replenished. It
will guarantee appropriate operation of the device and prolong its durability.
During work adapt a position that will counteract normal or unpredictable movements of the machine.
Before replacement of the head or any other element, the riveting machine must be disconnected from the source of compressed
air.
It is prohibited to use the machine without the rivet head, since it increases the risk of cRUShing a part of the body by the
machine.
It is prohibited to use the machine without the protection against ejected, cut stems of the rivets.
In case of an interruption of the power supply of the device, release the trigger of the machine.
It is necessary to use solely those lubricants and preservation agents which are recommended in the following part of the
O R I G I N A L I N S T R U C T I O N
10