Olivetti Copia 9915F Manual De Instrucciones página 13

All manuals and user guides at all-guides.com
If the test print completes successfully, click the Finish button. "The installation of
13
the Copia 9915F Software is complete." window will be displayed. Click the OK
button.
If you have any problem with the test print, see TROUBLESHOOTING on page
1-19.
Windows 3.1x:
With both the computer and the printer turned off, connect the printer to the computer with a
parallel interface cable. For connection instructions, see page 1-4.
Load paper into the paper tray of the printer. For instructions on loading paper, see the
1
section LOADING COPY PAPER in the copier operation manual.
Turn on the printer and then start Windows on your computer.
2
Before installing the printer driver, be sure to close all other applications which
may be open.
Insert the installation CD-ROM into a CD-ROM drive.
3
Choose File from the Menu bar in Program Manager, and then choose the R u n ...
4
command.
Type R:\SETUP (if the CD-ROM is designated as drive R) in the command line box
5
and then click the OK button.
Select a directory to which the printer driver will be installed and click the Next button.
6
To install it to the default directory, click the Next button.
A "printer port to be used" window will be displayed. Normally, LPT1 is automatically
7
set.
Then ensure that Yes is checked to use this printer as the default printer.
A "Confirm installation" window will be displayed. To continue installation, click Yes.
8
When the installation is complete, restart Windows.
9
INSTALLING THE PRINTER DRIVER SOFTWARE
1-11