Using Other Installed Drivers - Olivetti Copia 9915F Manual De Instrucciones

USING OTHER INSTALLED DRIVERS

If you use another GDI printer or a Windows Printing System printer, interference between
printers may occur and printing may not be performed properly.
To use another GDI printer or a Windows Printing System printer, you must change the port
setting of the printer driver using the following procedure.
If another printer does not operate properly when the Copia 9915F printer
driver is set to "FILE", uninstall the Copia 9915F printer driver.
To uninstall the driver, see UNINSTALLING PRINTER DRIVER on page 1-25.
Windows 95/Windows 98/Windows NT 4.0:
Click the Start button.
1
Select Settings and then click Printers.
2
Right-click the Copia 9915F icon in the printer dialog box and then click Properties.
3
For this description, it is assumed that the mouse is configured for right hand
operation.
Click the Details tab (Ports tab – on Windows NT4.0) in the Properties dialog box,
4
select FILE: in the Print to the following port list box, and click the OK button.
Right-click the icon of the printer to be used and click Properties.
5
Click the Details tab (Ports tab – on Windows NT4.0) in the Properties window, select
6
LPT1 (or the currently used port), and click the OK button.
To use the Copia 9915F again, perform the same procedure but select the
port to be used (for example, LPT1) in step 4.
Windows 3.1x:
Double-click the Control Panel icon in the Main window of Program Manager.
1
Double-click the Printers icon. The Printers window will then open.
2
3
Select Copia 9915F, and then click the Connect button.
1-24
All manuals and user guides at all-guides.com