Functional Description - Makita ML003G Manual De Instrucciones

10.
•
cautionary markings on (1) battery charger, (2) battery,
and (3) product using battery.
• Do not disassemble or tamper the battery cartridge. It
•
overheating, possible burns and even an explosion.
•
clear water and seek medical attention right away. It may
• Do not short the battery cartridge.
• Do not store and use the tool and battery cartridge in
locations where the temperature may reach or exceed
50 °C (122 °F).
• Do not nail, cut, crush, throw, drop the battery cartridge,
explosion.
• Do not use a damaged battery.
•
For commercial transports e.g. by third parties,
contacts and pack up the battery in such a manner that it
cannot move around in the packaging.
•
Makita. Installing the batteries to non-compliant products
electrolyte.
•
•
heat which can cause burns or low temperature burns.
•
use as it may get hot enough to cause burns.
• Do not allow chips, dust, or soil stuck into the terminals,
cartridge.
• Unless the tool supports the use near high-voltage
electrical power lines, do not use the battery cartridge
near high-voltage electrical power lines. It may result in a
•
11.
•
discharged. Always stop tool operation and charge the
battery cartridge when you notice less tool power.
•
• Charge the battery cartridge with room temperature at
10 °C - 40 °C (50 °F - 104 °F). Let a hot battery cartridge
•
tool or the charger.
•
period (more than six months).
CAUTION:
non-genuine Makita batteries, or batteries that have been
Save all warnings and instructions
for future reference.

FUNCTIONAL DESCRIPTION

CAUTION:
•
Installing or removing battery cartridge
CAUTION:
• Hold the appliance and the battery cartridge firmly
when installing or removing battery cartridge.
Failure to hold the appliance and the battery cartridge
in damage to the appliance and battery cartridge and a
•
and battery cartridge when loading battery cartridge as
well as between the appliance and the battery cover
when closing the battery cover.
To install the battery cartridge, release the cover lock, and
open the battery cover. (Fig. 1)
Insert the battery cartridge. Align the tongue on the battery
cartridge with the groove in the housing and slip it into
place. Insert it all the way until it locks in place with a little
battery cover.
CAUTION:
•
to you or someone around you.
•
does not slide in easily, it is not being inserted correctly.
5 E n g l is h
(Fig. 2)