Carrier XCT 7 40VCB117FQEE Manual De Instalación Y Funcionamiento página 29

Software Installation
If the status of the below indoor unit is ON, Set temp.is 24°C, cool, low speed. Press the 'Set' button to change
set point to 16°C.
Current set point
Press this button, set point
changes to 16°C
(b). Working mode/Control mode
It displays Working mode and control mode under "status" label
Working mode: No Limit, Cool Only, Heat Only;
Control mode: Last in first out, central control, Lock;
Working mode
Control mode
27