Kit Assembly - Metra 99-8233B Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
2. Secure the radio brackets to the radio
using the screws supplied with the
radio. (Figure A)
3. Secure the pocket to the radio bracket
assembly using (4) #8 x 3/8" Phillips
screws supplied. (Figure A)
4. Secure the climate control to the
completed assembly using the factory
hardware. (Figure A)
5. Locate the factory wiring harness and
antenna plug in the dash and make all
necessary connections to the radio.
Metra recommends using the proper
mating adapters from Metra and/
or AXXESS. Re-connect the negative
battery terminal and test the radio for
proper operation.
6. Snap the radio trim panel to the factory
radio/climate trim panel, and then
reassemble the dash in reverse order
of disassembly. (Figure B)

Kit Assembly

(Figure A)
(Figure B)
99-8233B
ISO DDIN radio provision
1. Secure the radio brackets to the
radio using the screws supplied
with the radio. (Figure A)
2. Secure the climate control to the
completed assembly using the
factory hardware. (Figure A)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
4. 5. Snap the radio trim panel to the
factory radio/climate trim panel,
and then reassemble the dash
in reverse order of disassembly.
(Figure B)
3
(Figure A)
(Figure B)